LEARNTEC 2027Meet Virtualbadge.io in Karlsruhe in February 2027.Book a meeting at our stand
How-to guide

Embed Trust Badges on partner websites

You recognize companies you have certified, audited or accepted as partners. The partner copies a short HTML code from its badge page, and every click on the Trust Badge leads to the validation page. This guide shows every step in Virtualbadge.io.

15 minFor issuersUpdated November 2026
At a glanceGuide
in 8 steps
Time
about 15 minutes
For
Issuers
Where
Template Recipient Experience Recipient Access Page pencil next to the preview. At the partner: badge page Add badge to website
Plan
Advanced and Professional
What you need
  • The Advanced or Professional plan
  • A badge template for the award
  • Name and email address of a contact at each company
  • At the partner: someone who can edit the website

No account yet? Start a free trial. It runs for seven days.

A Trust Badge is a badge that a company shows on its own website: as a certified partner, an approved supplier, a member of an association or the holder of a seal. Unlike a plain image, one click takes visitors to the validation page. It shows who issued the award, who holds it and how long it is valid. The example shows the Trust Badge “Certified Partner 2027” that Akademie Nord awards to Werk Süd GmbH.

Example: the Trust Badge “Certified Partner 2027” in the three sizes of the HTML snippet.
Tip

Steps 1 to 4 are yours as the issuer. Your partner copies the code from its own badge page, as shown in steps 5 to 7. Further down you will find a quick guide for your partners to pass on.

Typical Trust Badges
UseExample name
Partner and reseller programCertified Partner 2027
Approval of suppliers and service providersApproved Supplier
Association or networkMember 2027
Seal after an auditAudited Company 2027
Award or rankingTraining Company of the Year

Step 1: Create a badge template for the award

A Trust Badge is a template of the type badge. Open “Credentials” and the “Credentials” tab, click the arrow next to “Create New Template” and choose “New Badge”. The guide Issue digital badges shows each step.

Under “Template Name”, enter the name of the award, for example “Certified Partner 2027”. Visitors will read this name on the validation page. If the award is only valid for a certain time, set an expiration date in the basic details.

Design the badge so that it still works when it is small: on the website it appears 120 to 240 pixels wide. A few words, strong contrast and your name as the issuer are enough.

“New Badge” in the template menu.

Step 2: Open the recipient access page of the template

Whether your partner sees the code for the website depends on the recipient access page of the template. That is the page where recipients collect their credential. The section “Trust badge for your website” is hidden there at first.

In the template, open “Recipient Experience” and use “Continue” to go to the step “Recipient Access Page”. On the right you see “Preview: Access Page”. Click the pencil there.

Step “Recipient Access Page” in the recipient experience: the pencil next to the preview opens the configuration.
Important

The preview with the pencil only appears on wide screens. If it is missing, enlarge the browser window or switch to a larger screen.

Step 3: Show the section “Trust badge for your website”

The “Overview” page lists the sections of the recipient access page in their order. Next to each section there is an eye. If it is crossed out, recipients do not see the section.

Click the eye next to “Trust badge for your website” until it is no longer crossed out. The arrows beside it change the order of the sections. Confirm the change with “Save”.

The setting only applies to this template. How to show the section for all new templates is described under Show the section for all new templates.

The “Overview” page: the eye next to “Trust badge for your website” is open, so the section is visible.

Step 4: Issue the Trust Badge to the company

In the template, open “Recipients” and choose “Add recipients” and “Add single”. Enter the email address of your contact and, as the recipient name, the name of the company, for example “Werk Süd GmbH”. This name later appears on the validation page under “Issued to”.

Then send the email with the button at the top right. For many companies at once, the CSV list is a good fit: each company receives its own Trust Badge with its own validation page.

“Add single recipient”: the recipient name is the name of the company.
Tip

Send the email to the person who can pass the code on or add it to the website, for example in your partner’s marketing team.

Step 5: The partner opens its badge page

Your contact opens the email and clicks the button that leads to the badge. The page “Your Badge is ready” appears with the name, issuer, identification number, issue date and expiration date.

Under “Trust badge for your website”, your contact clicks “Add badge to website”.

The partner’s badge page with the section “Trust badge for your website”.
Tip

The same page shows “The validation link” and the “PNG” button. Your partner needs both to add the image by hand, see Without HTML: image and link by hand.

Step 6: Choose a size and copy the snippet

In the dialog “Add badge to your website”, your partner chooses the size: “Small”, “Medium” or “Large”. The preview shows the Trust Badge in the chosen size, with the matching code below it.

A click on “Copy snippet” puts the code on the clipboard. The page confirms this with a short message.

The dialog “Add badge to your website” with size selection, preview and HTML snippet.
The three sizes of the Trust Badge
SizeWidthFits, for example
“Small”120 pixelsFooter or sidebar
“Medium” (default)180 pixelsA “Partners and awards” page
“Large”240 pixelsHome page or “About us”

Step 7: Paste the code into the website

The code consists of a link and an image. It contains no script. Your partner pastes it wherever the system accepts HTML: in an HTML block of the site builder or directly in the page template. In WordPress the block is called “Custom HTML”.

Typical places are the footer, a “Partners and awards” page or the home page. A click on the Trust Badge opens the validation page in a new tab, and your partner’s website stays open.

Below the image you see the code as an example. The ID in it is invented; your partner uses the code from its own badge page.

Example with an invented website: the Trust Badge in the footer of Werk Süd GmbH.
Example
<a href="https://www.virtualbadge.io/certificate-validator?credential=e41b7c2a-9d35-4f68-a1c0-5b8e2f7d3a96" target="_blank" rel="noopener noreferrer">    <img src="https://blob.virtualbadge.io/cert-k3v8m2xq7tbn4hwd-pzra/openbadges/badges/e41b7c2a-9d35-4f68-a1c0-5b8e2f7d3a96.png" alt="Verified credential trust badge" width="180" /></a>
Tip

The value after width is the width in pixels. If you need a different size, change only this number. A more specific alternative text after alt helps screen readers and search engines, for example “Certified Partner 2027 of Akademie Nord”.

Step 8: Test the click

Open your partner’s website and click the Trust Badge. Under “Issuance details”, the validation page shows the badge, the company under “Issued to”, the issue date, “Valid until” and you as the issuer.

“Document validity” shows whether the Trust Badge has been revoked, has expired or has been superseded by a newer version.

Validation page of the Trust Badge. The screenshot comes from a test account, hence the note “This is a test badge”.

Follow this guide with your own data.

Check the result

  • The section “Trust badge for your website” appears on your partner’s badge page.
  • The Trust Badge is visible on the partner’s website and easy to read in the chosen size.
  • A click opens the validation page in a new tab.
  • The validation page names the company, you as the issuer and the correct date under “Valid until”.

More on this: Trust BadgesDigital Badges

Quick guide for your partners

You can copy these four steps into the email to your partners.

Four steps to the Trust Badge on your own website
StepWhat to do
1Open the email about the award and click the button that leads to the badge
2On the page “Your Badge is ready”, click “Add badge to website” under “Trust badge for your website”
3Choose a size and click “Copy snippet”
4Paste the code into an HTML block of the website, publish the page and click the Trust Badge once
Tip

In the email, also say where the Trust Badge may be shown and how long the award is valid. That saves questions later.

Show the section for all new templates

The same overview exists for the whole organization. Open “Account”, “Settings” and “Organisation”. Under “Access Page Customisation”, click the pencil, show the section and save.

Important

Changes at this level only affect templates you create afterwards. Change existing templates one by one, as described in steps 2 and 3.

When the award ends

A Trust Badge is only as current as the credential behind it. When the expiration date is reached or you revoke the credential, the validation page shows it immediately.

“Document validity” on the validation page: not revoked, not expired, not superseded. The first line “Not a real credential” only appears for credentials from a test account.

Agree with your partners that they remove the code as soon as the award ends. To extend it, issue a new Trust Badge, for example “Certified Partner 2028”. Your partner then replaces the code on the website.

The guides Set an expiration date and Revoke or replace a certificate show how to limit and withdraw credentials.

Without HTML: image and link by hand

If a site builder does not accept HTML code, there is another way. On the badge page, your partner downloads the image with “PNG”, adds it to the website as an image and links it to the address under “The validation link”.

The same way works for an email signature: insert the image, reduce its size and link it to the validation link.

Tip

Set the link to open in a new tab and give the image an alternative text.

Frequently asked questions

Which plan includes Trust Badges?

The section “Trust badge for your website” can be shown in the Advanced and Professional plans. If you have questions about your plan, reach us through the contact page.

The section is missing on my partner’s badge page. Why?

In most cases it is still hidden in the template. Open the configuration of the recipient access page as in steps 2 and 3, show the section and save. Then ask your partner to reload the badge page.

Does my partner need a Virtualbadge.io account?

No. The link in the email leads to the badge page. Depending on the template settings, the person first confirms their identity, for example with a code sent by email.

Does the Trust Badge load scripts on my partner’s website?

No. The code consists of a link and an image. The image is loaded from a Virtualbadge.io server, and the link leads to the validation page.

Can I also issue a Trust Badge to individuals?

Yes. The section appears on every badge page of a template in which it is shown. That fits, for example, certified consultants with their own website.

What do visitors see when the Trust Badge has expired or been revoked?

The validation page shows the status under “Document validity”. You can read more under When the award ends.

Does the Trust Badge also work in an email signature?

Yes, as an image with a link. Many email programs do not accept HTML code. The section Without HTML: image and link by hand shows the way.

How does the Trust Badge differ from the embedded validation page?

The Trust Badge shows a single award on the website of the company that received it. With the embedded validation page, visitors to your own website verify credentials that you have issued.

Where to go next

Try it with your own certificate

Upload your current certificate design, issue a test credential and follow the guides with real data. The trial runs for seven days.

More than 1,000 organizations issue with Virtualbadge.io, including telc, Vodafone, Dell, IDP, EBS Universität and Mannheim Business School.